A Vision To Clear Solutions.
Usually steps will be 6″ to 7″
height. Normally For 30 * 40 site staircase size will be around 5 feet OR 6
feet.
The more space you have for steps is
more comfortness you will get.
Steps will be constructed in
two or three different ways
<Attach photos>
Below Picture shows the base for
Steps. At the place of steps landing mason will dig one to two feet
depth and they will pour concrete.
<Attach photos>
While constructing staircase stairs
side edges should be upper than steps. So that water flow will not come outside
of steps. This will be useful mainly during rainy seasons.
<Attach photo here>
If you are constructing staircase
steps with cement, thread marks should be applied to each stair which will give
good grip
<Attach photo here>
If you are covering steps with kadapa
stones ask layer to draw lines on edges
<Attach photo here>
While selecting clay tiles select the
ones which has grip
<Refer picture in Stair case
designs section — embossed grip>
<Attach few clay tiles photos>
You should ask mason to keep
staircase water borders, this will avoid water coming below stair case.
<Attach a photo here>
Lighting
Plan your lighting such a way
so that it is visible in both of the stairs.
If you look at the below picture
light ket in landing place so that if you switch-on the light you can see
the stairs in both directions. I do see most of the people neglect this but
this is extremely useful
Stair case designs:
By using different
clay color tiles you can design a pattern which will give good look
for staircase.
In below picture 2′ red tile was kept
in between and 6 inch black tile.
Fish Bone Steps:
Steps with Granite
Gru cutting (line at the edge of each
step) will give proper grip so that it will not skid. In case if you are going
with granite steps make this arrangement
Steps with cement finish
No comments:
Post a Comment